Advanced Metal Coatings has developed a Quality Management System that is tailored with the intent of ISO 9001:2008 and AS 9100D . Our staff take ownership in their individual tasks and with the quality aspects of every product they handle. We like to say that everyone of our employees are “ Inspectors” of our work and your product. We strive for ZERO Defects and it shows in the quality we produce and the services we provide.
All of our equipment is calibrated to ISO-10012-1, formally Mil-STD-45662A and ANSI/NCSL Z540.3 . We perform dry tape to ASTM D3330/M with tape per ASTM -D-3359 and wet tape adhesion testing to Federal Standard 141, test method 6301.3 / ASTM D 2510/D3330M. Specular Gloss testing and verification is performed to ASTM D523 @ 20,60 & 80 degrees respectively.
Dry Film Thickness Testing is conducted per ASTM E376-11 and ASTM D 7091-B via Eddy Current Method. Wet film Testing is conducted per ASTM D1212 up to 60 mils. Thickness. Accelerated Corrosion / Salt Spray Testing is conducted per ASTM B-117.
Surface treatment testing prior to applying coating is performed with litmus papers and checked for pH and a water break-free condition to assure proper adhesion and finished results.
For program specific special processes and control, Advanced Metal coatings, LLC., process engineering staff are available to develop, write and submit for review special process control and test documents to meet your individual program requirements.
We are available for consultation and will provide FAI, First Article Inspection data upon prior request. We can submit this data or you may perform source / site inspection at our facility.
Quality Assurance = Prevention
Quality Control = Detection
Fill out Our Request For Quote to Get Started
You are also welcome to give us a call at 727-744-9508
